ELECTRONIC MODULE,STANDARDIZED

5963FSC

01NCB code

613-1910Item number

NIIN 01-613-1910

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DF	J	SMS	EA	0.0000	$2,589.31	1	U	0	N	SF9---N	$0.00	F
01-OCT-2026	DS	J	SMS	EA	0.0000	$2,589.31	1	U	0	N	-------	$0.00	I

OVERALL LENGTH	MILLIMETERS NOMINAL 184.0
OVERALL HEIGHT	MILLIMETERS NOMINAL 36.0
OVERALL WIDTH	MILLIMETERS NOMINAL 135.0
AVERAGE LIFE MEASUREMENT	NOT RATED
BASIC SHAPE STYLE
INCLOSURE TYPE	ENCASED
INSTALLATION DESIGN	MODULE
CIRCUIT CONSTRUCTION TYPE	SOLID STATE
SIGNAL DATA TYPE PER CHANNEL	OPERATING CHANNEL DIGITAL
PART NAME ASSIGNED BY CONTROLLING AGENCY	DATA ACQUISITION MODULE
SPECIAL FEATURES	THE PT-104A IS A FOUR-CHANNEL, HIGH-RESOLUTION TEMPERATURE DATA ACQUISITION MODULE FOR USE WITH PT100 AND PT1000 RTD SENSORS. IT CAN ALSO BE USED TO TO MEASURE RESISTANCE (375 OHM AND 10,000 OHM RANGES) AND VOLTAGE (115 MV OR 2.5 V RANGES). IN PT100/PT1000/ RESISTANCE MODE, THE UNIT USES A FOUR WIRE CIRCUIT. IN VOLTAGE MODE, THE INPUT CONNECTOR CAN BE TREATED AS A DIFFERENTIAL INPUT WITH GROUND, OR TWO SINGLE-ENDED INPUTS. BOTH INPUTS MUST BE 0V OR ABOVE, THOUGH IT DOES NOT MATTER WHICH INPUT HAS THE HIGHER VOLTAGE. FOR THE 115 MV VOLTAGE RANGE, THE ACCURACY MAY VARY BY 2 PERCENT, AND THE TEMPERATURE COEFFICIENT WILL BE 100 PPM/DEGREE C.
PROPRIETARY CHARACTERISTICS	PACS

PICA SICA: P
PKG cat: 69F0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: A
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: 00
No requirement
THK: 0
Not applicable
Unit cont: 10
Any suitable container included in this table may be used (see J.4.9.1).
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.