ATTENUATOR,VARIABLE

5985FSC

01NCB code

221-3600Item number

NIIN 01-221-3600

Identification

Part number	CAGE	CAGE status	RNCC	RNVC	Document availability code	RNAAC
2139371G001	28527 L3HARRIS TECHNOLOGIES, INC.	A	7	2	B	TX
1071-12	34078 CINCH CONNECTIVITY SOLUTIONS INC	A	3	2	E	TX

APPLICATION DESIGN	TRANSMISSION LINE
BODY STYLE
OVERALL LENGTH	INCHES NOMINAL 3.600
OVERALL HEIGHT	INCHES NOMINAL 1.630
OVERALL WIDTH	INCHES NOMINAL 1.775
SHAFT DIAMETER	INCHES NOMINAL 0.250
SHAFT LENGTH	INCHES NOMINAL 0.380
OPERATING TEMP RANGE	CELSIUS 0.0 TO 55.0
END ITEM IDENTIFICATION	SONOBUOY AN/SSQ-74
VOLTAGE STANDING WAVE RATIO	1.20 AND 1.30 AND 1.45
COAXIAL CONNECTOR SERIES DESIGNATION	SMA
POWER RATING	WATTS AVERAGE 2.0
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS	0.5
OVERALL ATTENUATION RANGE IN DECIBELS	0.0 TO 60.0
ATTENUATION VARIATION METHOD	STEPPED
STEP POSITION QUANTITY	6
ATTENUATION PER STEP IN DECIBELS	10.0
MOUNTING FACILITY TYPE AND QUANTITY	CONNECTOR 2
FREQUENCY RANGE	HERTZ MINIMUM 0.000 AND GIGAHERTZ MAXIMUM 12.400
OVERALL ATTENUATION ACCURACY IN DECIBELS	-1.20 TO 1.20
SEGMENT ATTENUATION RANGE IN DECIBELS	0.00 TO 10.00 AND 10.00 TO 20.00 AND 20.00 TO 30.00 AND 30.00 TO 40.00 AND 40.00 TO 50.00 AND 50.00 TO 60.00
SEGMENT ATTENUATION ACCURACY IN DECIBELS	-0.50 TO 0.50 AND -0.50 TO 0.50 AND -0.60 TO 0.60 AND -0.80 TO 0.80 AND -1.00 TO 1.00 AND -1.20 TO 1.20
ADJUSTMENT DEVICE TYPE AND QUANTITY	SHAFT 1
SHAFT TYPE	ROUND
IMPEDANCE RATING IN OHMS	INPUT-OUTPUT 50.0
PROPRIETARY CHARACTERISTICS	PACS
TERMINAL TYPE AND QUANTITY	CONNECTOR, COAXIAL, FEMALE 2

PICA SICA: P
PKG cat: 69F0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: XXX
Method of preservation: ZZ
Special requirements apply that are not represented by the code symbols; details are provided with the acquisition...
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: ZZ
Special requirement – See specific instructions or drawings provided
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: ZZ
Special requirements.
THK: C
3/4 inch thick
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
Inter cont: ZZ
Special requirement – See specific instructions or drawings provided.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.
Supplemental instructions: IP025: PACKAGING, MARKING,

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.