CIRCUIT CARD ASSEMBLY

5998FSC

01NCB code

190-9331Item number

NIIN 01-190-9331

Identification

END ITEM IDENTIFICATION	AN/UYK-51(V), PROCESSOR SET DATA; 7236550-00(90536), PROCESSOR SET DATA
FEATURES PROVIDED	ELECTROSTATIC SENSITIVE
CRITICALITY CODE JUSTIFICATION	FEAT
SPECIAL FEATURES	ITEMS ARE BEING CODED AS CRITICAL TO INSURE SOURCE INSPECTION WILL BE PERFORMED AT THE POINT OF MANUFACTURE, PRIOR TO MATERIAL RECEIPT BY THE US NAVY OR OTHER DOD COMPONENTS. THESE ITEMS ARE PIECE PARTS OR END ITEMS IN SUPPORT OF VITAL MILITARY HARDWARE NECESSARY TO SUSTAIN THE SUCCESSFUL MISSION OF THE SHIPS, SUBMARINES, AND SHORE STATIONS OF THE US NAVY. CRITICAL FEATURES INCLUDING, BUT NOT LIMITED TO, DIMENSIONS, TOLERANCES/CLEARANCES, ELECTRONIC CHARACTERISTICS, AND METALLURGICAL PROPERTIES WILL BESPECIFIED FOR GOVERNMENT Q AR (QUALITY ASSURANCE REPRESENTATIVES) TO INSURE THE HIGHEST POSSIBLE DEGREE OF QUALITY AND RELIABILITY OF THESE PARTS BEING DELIVERED UNDER NAVICP CONTRACTS; CAPACITOR 23, CONNECTOR 1, COIL 1, CORE 3, DIODE 28, HEAT SINK 2, INSULATOR 2, LIGHT EMITTING DIODE 2, MICROCIRCUIT 4, PRINTED WIRING BOARD 1, RESISTOR 27, TERMINAL STUD 31, TRANSFORMER 1, TRANSISTOR 11

MOE rule	MOE CD	AMC	AMSC	NIMSC	Date assigned	IMC	IMCA	PICA	PICA LOA	Auth collab	DSOR
ZW01	ZW				01-NOV-98			ZW	81	ZW
N2H4	DN	3	U	P	01-APR-91	E	HD	HD	22	HD	CN

PICA SICA: P
PKG cat: ZZZ0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
Unit of issue: EA
TOS: B
Intermediate container qty: 000
No intermediate container quantity specified (000)
Method of preservation: GX
Preserve by Method 41 using an approved ESD control program (see 5.2.4.1.1) as follows: Items subject to damage by...
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: LT
PPP-C-795, Class 2, antistatic closed cell plastic film cushioning
THK: B
1/2 inch thick
Unit cont: ED
ASTM D5118/D5118M, Type CF, Class weather resistant, corrugated fiberboard box.
PKG data source: A

PICA SICA: P
SPC MKG: 39
ESD sensitive electronic device requirements of MIL-STD-129 apply
Inter cont: 00
No requirement.
UCL: B
Unit container provides level B packing protection.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: F
Packing is not required: the unit container shall also serve as the shipping container.
Lvl c: F
Packing is not required; the unit container shall also serve as the shipping container.
Unit pack weight: 7.0000
UP SZ MAXB: 10.00000
UP SZ MAXL: 15.00000
UP SZ MAXH: 12.00000
Unit pack cube: 1.0420
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.