MOTOR,ALTERNATING CURRENT

6105FSC

01NCB code

172-2372Item number

NIIN 01-172-2372

Identification

OVERALL HEIGHT	INCHES 6.688
OVERALL LENGTH	INCHES 11.438
OVERALL WIDTH	INCHES 6.500
KEYWAY WIDTH	SINGLE END INCHES NOMINAL 0.188
KEYWAY DEPTH	SINGLE END INCHES NOMINAL 0.094
SHAFT DIAMETER	SINGLE END INCHES NOMINAL 0.625
KEYWAY LENGTH	SINGLE END INCHES NOMINAL 1.375
SHAFT ROTATION DIRECTION	SINGLE END CLOCKWISE OR COUNTERCLOCKWISE
DUTY CYCLE	CONTINUOUS
ENCLOSURE FEATURE	DRIPPROOF PROTECTED-15 DEG
WINDING TYPE	INDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE
MOUNTING METHOD	FIXED BASE
MOUNTING FACILITY TYPE AND QUANTITY	SLOT 4
COOLING METHOD	SELF-VENTILATED
CURRENT RATING METHOD	LOAD
INCLOSURE SPECIFICATION	NEMA
FEATURES PROVIDED	HORIZONTAL MOUNTING POSITION
FRAME SIZE DESIGNATION	56H
POWER RATING	OUTPUT HORSEPOWER 1.000
LENGTH OF SHAFT FROM HOUSING	SINGLE END INCHES 1.938
SHAFT CENTER TO MOUNTING SURFACE DISTANCE	SINGLE END INCHES 3.500
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	INCHES 3.000
TEMP RATING	AMBIENT CELSIUS 40.0
ROTOR SPEED RATING IN RPM	SINGLE FULL LOAD 1725.0
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	INCHES 4.876
CURRENT RATING IN AMPS	INPUT FIRST MULTIPLE 3.400 OR SECOND MULTIPLE 1.700
CONNECTION TYPE AND VOLTAGE RATING IN VOLTS	INPUT LINE TO NEUTRAL FIRST MULTIPLE 230.0 OR LINE TO NEUTRAL SECOND MULTIPLE 460.0
SHAFT END CHARACTERISTIC	SINGLE END SINGLE STYLE A9
PHASE	INPUT THREE
FREQUENCY IN HERTZ	50.0 OR 60.0
TERMINAL TYPE AND QUANTITY	SCREW 6

PICA SICA: P
PKG cat: 60C0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: 000
No intermediate container quantity specified (000)
Method of preservation: 10
Physical protection
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: ZZ
Special requirements.
THK: C
3/4 inch thick
Unit cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: 00
No requirement.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.