ARMATURE,MOTOR

6105FSC

01NCB code

275-6613Item number

NIIN 01-275-6613

Identification

Part number	CAGE	CAGE status	RNCC	RNVC	Document availability code	RNAAC
58H102796	01289 GENERAL ELECTRIC COMPANY	A	5	1	5	HW
58A115602	01289 GENERAL ELECTRIC COMPANY	A	5	1	5	HW
58D147169	01289 GENERAL ELECTRIC COMPANY	A	5	1	5	HW
58D147026	01289 GENERAL ELECTRIC COMPANY	A	3	2	5	HW

OVERALL LENGTH	INCHES NOMINAL 228.0000
OVERALL DIAMETER	INCHES NOMINAL 128.0000
CONSTRUCTION	PERMANENT MAGNET
SPECIAL FEATURES	SHUNT DC MOTOR; 5000 HP; 145 RPM; 750 V; 5400 AMP,150 PER CENT CURRENT; DESIGN TEMPERATURE IS 50C; HEAT EXCHANGER IS DOUBLE-TUBE TYPE; BEARINGS ARE SELF-LUBRICATED; COUPLING END BEARING,NO INTERNAL SUMP,REQUIRES 7.5 GPM AT 100 PLUS/MINUS 20F; COMMUTATOR END BEARING - 15.0 X 7.4,33.3 GALLONS; MAIN FANS - 3 EACH - 30 HP,3545 RPM,460 V,34.9A,30-60 HZ,1:15,SERVICE FACTOR - 39,360 CFM TOTAL; AMBIENT TEMPERATURE - 50 DEGREES C; ROTATION IS COUNTERCLOCKWISE; ROTOR AND SHAFT WEIGHT = 50,500 LBS; STATOR WITH BRUSH RIGGING WEIGHT = 42,500 LBS; THRUST AND JOURNAL BEARING WEIGHT = 4,930 LBS; 15.0 X 7.40 BEARING AND PEDESTAL WEIGHT = 3,437 LBS; MAIN AIR FANS WEIGHT = 1,875 LBS; MAKE-UP AIR FAN AND FILTERS WEIGHT = 850 LBS; COOLER WEIGHT = 2,455 LBS; AIR SHIELDS WEIGHT = 12,540 LBS; TACHOMETER DRIVE WEIGHT = 500 LBS; APPLICABLE TO T-ARC 7 CLASS SHIP

PICA SICA: P
PKG cat: ZZZZ
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
Unit of issue: EA
TOS: B
Intermediate container qty: 000
No intermediate container quantity specified (000)
Method of preservation: ZZ
Special requirements apply that are not represented by the code symbols; details are provided with the acquisition...
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: ZZ
Special requirement – See specific instructions or drawings provided
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: ZZ
Special requirements.
THK: Z
Special requirements – See specific instructions or drawings provided
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: A

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: 00
No requirement.
UCL: B
Unit container provides level B packing protection.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: F
Packing is not required: the unit container shall also serve as the shipping container.
Lvl c: F
Packing is not required; the unit container shall also serve as the shipping container.
Unit pack weight: 0.0000
UP SZ MAXB: 108.00000
UP SZ MAXL: 354.00000
UP SZ MAXH: 132.00000
Unit pack cube: 2920.5000
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.
Supplemental instructions: ZZ = PACKAGING UPDATE REQUIRED

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.