DISTRIBUTION BOX

6110FSC

01NCB code

528-1193Item number

NIIN 01-528-1193

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Management control	Net price	USC
01-OCT-2026	DN	D	SMS	EA	0.0000	$3,704.95	1	U	0	9B-----	$0.00	N
01-OCT-2026	DS	D	SMS	EA	0.0000	$3,704.95	1	U	0	-------	$0.00	I

OVERALL DEPTH	INCHES NOMINAL 3.570
OVERALL HEIGHT	INCHES NOMINAL 7.500
OVERALL WIDTH	INCHES NOMINAL 5.750
END ITEM IDENTIFICATION	CONSOLIDATED GROUND SUPPORT EQUIPMENT POWER PLANT, ELECTRIC; MOBILE ELECTRIC POWER PLANT
SPECIAL FEATURES	INTERFACE BETWEEN ELECTRONIC CONTROL MODULE(ECM) AND THE DIGITAL DATA READER (DDR) FOR PURPOSE OF DISPPLAYING DIESEL ENGINE PARAMETERS AND MALFUNCTIONS STORED IN THE ECM; THE DIAGNOSTIC MODULE (DM) SHALL FLASH OUT CODES STORED IN THE ECM WHEN THE DIAGNOSTIC SWITH IS TOGGLED; THE CONNECTION OF THE DM TO THE ECM SHALL BE MADE VIA DETROIT DIESEL CONNECTOR 023513052; ADJUSTMENTS SHALL BE PROVIDED FOR THE SETTING ENGINE IDLE SPEED ABOVE 600 RPM, ENGINE RATED SPEED TO PRODUCE 400 HZ+/- 2 HZ GENERATOR OUTPUT AND ENGINE OVERSPEED AT 2050+/- 50RPM; THE DM SHALL PROVIDE A DC SIGNAL TO THE ENGINE FAULT MODULE FOR LOW OIL PRESSURE AND HIGH ENGINE TEMPERATURE STUTDOWN; THE DM SHALL OPERATE ON 22-29 VDC VOLTAGE RANGE; APPLY P/N 21269 D624-2516A PERMIL-STD-130 APPRO. WHERE SHOWN.
STYLE DESIGNATOR

PICA SICA: P
PKG cat: 60Z0
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
TOS: B
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 41
Watervaporproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: NA
PPP-C-795, closed cell plastic cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene...
THK: D
1 inch thick
Unit cont: E5
ASTM D5118/D5118M, fiberboard box.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: DO
Any suitable fiber box included in this table may be used (see J.4.9.1).
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 4.1000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.3340
OPI: O
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.