CONTROL,TEMPERATURE,INDICATING

6685FSC

01NCB code

121-6891Item number

NIIN 01-121-6891

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Recoverability code	Management control	Net price	USC
01-OCT-2026	DF	J	SMS	EA	0.0000	$1,643.37	1	U	0	N	SF9AH-N	$0.00	F
01-OCT-2026	DS	J	SMS	EA	0.0000	$1,643.37	1	U	0	N	-------	$0.00	I

Part number	CAGE	CAGE status	RNCC	RNVC	Document availability code	RNAAC
27-2850-81	32242 JOHNSON CONTROLS, INC DIV BUILDING EFFICIENCY	A	5	9	2	ME
T-8000	32242 JOHNSON CONTROLS, INC DIV BUILDING EFFICIENCY	A	5	9	5	ME
27-2850-81	4G075 JOHNSON CONTROLS, INC. DBA JOHNSON CONTROLS	A	3	2	5	ME

OPERATING TEMP RANGE	FAHRENHEIT 110.0 TO 240.0
END ITEM IDENTIFICATION	LGM30 MISSILE SYSTEM
INCLOSURE TYPE	ENCASED
POWER SOURCE	EXTERNAL
MOUNTING METHOD	BULKHEAD
MAXIMUM OVERALL LENGTH	INCHES 3.070
MAXIMUM OVERALL WIDTH	INCHES 3.750
MAXIMUM OVERALL HEIGHT	INCHES 5.250
SPECIAL FEATURES	PNUEMATIC TEMPERATURE CONTROL WHICH OPERATES WITH A 25 PSIG MAXIMUM REGULATED AIR SUPPLY;CONTAINS TWO GAGES;ONE TO MONITOR INLET THE OTHER TO MONITOR CONTROL PRESSURES;HAS A 0-4 PSI SENSITIVITY PER DEG. F.;TEMPERATURE ADJUSTMENT IS CONCEALED;SURFACE MOUNTED;AMBIENT TEMPERATURE OPERATING RANGES FROMMINUS 10 DEG. F. TO +300 DEG. F.;TEMPERATURE INCLUDED WITH DIAL MARKINGS OF 2 DEG. F. PER CONTROLING RANGE;FURNISHED WITH CONTROL ARE 4 1/8 IN PIPE PLUGS;2 ELBOWS;2 ORIFACE FITTINGS;2 NO 10X1 3/4 IN MOUNTING SCREWS;CAPILLARY TUBE AND BULB IS STAINLESS STEEL AND FULLY COMPENSATED;BULB IS 4 IN LONG;CAPILLARY TUBE IS 35 FT LONG
SUPPLEMENTARY FEATURES	DIRECT ACTING
TYPE/MODEL DESIGNATION	T-8000

PICA SICA: P
PKG cat: 13ZZ
Unpackaged weight: 0.0000
Unpackaged width: 0.000
Unpackaged length: 0.000
Unpackaged height: 0.000
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: 31
Waterproof bag, heat sealed
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: 00
No requirement
Cush dun: NA
PPP-C-795, closed cell plastic cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene...
THK: C
3/4 inch thick
Unit cont: D3
PPP-B-566, PPP-B-676, or ASTM D5118/D5118M, folding, setup or fiberboard box.
PKG data source: P

PICA SICA: P
SPC MKG: 00
No special marking
Inter cont: E5
ASTM D5118/D5118M, fiberboard box.
Lvl A: E
Packing shall be accomplished to meet the performance test requirements of ASTM D4169, Distribution Cycle 18,...
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Unit pack weight: 0.0000
UP SZ MAXB: 0.00000
UP SZ MAXL: 0.00000
UP SZ MAXH: 0.00000
Unit pack cube: 0.0000
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.
Supplemental instructions: IP025: PACKAGING, MARKING,

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.