ADHESIVE

8040FSC

01NCB code

671-2252Item number

NIIN 01-671-2252

Identification

Effective date	Major organizational entity	Acquisition advice code	Source of supply	Unit of issue	Unit of measure quantity	Unit price	Quantity per unit pack	Controlled inventory item code	Shelf-life code	Management control	Net price	USC
01-OCT-2026	DN	J	SMS	KT	0.0000	$321.00	1	U	H	9B----H	$0.00	N
01-OCT-2026	DS	J	SMS	KT	0.0000	$321.00	1	U	H	-------	$0.00	I

PHYSICAL FORM	PASTE
SPECIFIC USAGE DESIGN	STRUCTURAL AEROSPACE ADHESIVE
CURING METHOD	AIR DRIED
MINIMUM FLASH POINT	DEG CELSIUS 93.40
RATED DRYING TIME	HOURS MINIMUM 6.00 AND HOURS MAXIMUM 12.00
PART NAME ASSIGNED BY CONTROLLING AGENCY	MAGNOBOND TWO PART EPOXY ADHESIVE
SPECIAL FEATURES	PHYSICAL STATE: PASTE/GEL; ODOR: SLIGHT ETHEREAL; BOILING POINT: 250.00 DEG. C.; RELATIVE DENSITY: 1.2; SOLUBILITY: NEGLIGIBLE; VOC CONTENT: NEGLIGIBLE; HAZARDOUS POLYMERIZATION WILL NOT OCCUR; AVOID HEAT, FLAMES AND SPARKS; HAZARDOUS DECOMPOSITION PRODUCTS: CARBON OXIDES, PHENOLS, AROMATIC HYDROCARBONS; TWO PART, ROOM TEMPERATURE CURING EPOXY PASTE ADHESIVE; CORROSIVE, AVOID PHYSICAL CONTACT W/ SKIN, MOUTH AND EYES;KEEP IN A DRY AND COOL PLACE.
COLOR	YELLOW
MATERIAL	RESIN EPOXY
SUPPLEMENTARY FEATURES	COLOR: PART A: YELLOW COLORED PASTE, PART B: BLUE COLORED SEMI-PASTE;

PICA SICA: P
PKG cat: ZZZ0
Unpackaged weight: 0.0000
Unpackaged width: 11.000
Unpackaged length: 57.000
Unpackaged height: 9.000
TOS: Z
Intermediate container qty: AAA
Quantity set by MIL-STD-2073-1E B.5: up to 100 unit packs, a maximum net load of 40 pounds, and a maximum of 1.5...
Method of preservation: HM
Packaging and marking for hazardous materials shall comply with applicable requirements for Performance Oriented...
Clng drying: 1
Any suitable process that is not injurious to the item.
Pres mat: 00
No requirement
Wrap mat: ZZ
Special requirements – see specific instructions or drawings provided
Cush dun: ZZ
Special requirements.
THK: C
3/4 inch thick
Unit cont: ZZ
Special requirement – See specific instructions or drawings provided.
PKG data source: P

PICA SICA: P
SPC MKG: 32
Type I, shelf life
Inter cont: ZZ
Special requirement – See specific instructions or drawings provided.
UCL: O
Unit container is not an acceptable shipping container.
Lvl A: Q
Packing shall be accomplished in accordance with table C.II for the packing level specified.
Lvl b: Q
Packing shall be accomplished in accordance with table C-II for the packing level specified.
Lvl c: F
Packing is not required; the unit container shall also serve as the shipping container.
Unit pack weight: 0.0000
UP SZ MAXB: 21.00000
UP SZ MAXL: 67.00000
UP SZ MAXH: 19.00000
Unit pack cube: 0.0000
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted.

Your request goes to A-DEFENSE, a US Defense supplier in Texas, who will reply by email.